Ekan® OIL 50
Universal mineral-based release agent for wooden or metal formwork
Ekan® OIL 50
Universal mineral-based release agent for wooden or metal formwork
Precast Admixtures
Features
EKAN® OIL 50 is a non-toxic synthetic mineral-based release oil that facilitates the removal of concrete from the mold, helps release trapped air on the concrete surface, and allows for a smooth finish.
Before applying EKAN® OIL 50, the formwork surface must be properly cleaned and the application area must be dry. Any wood or steel particles, residue, or dust must therefore be removed from the surface.
Instructions for use
Areas of use
- Wooden, plywood, plastic, steel formwork, etc.
- Ready-mix and precast concrete, decorative and eco-friendly concrete
- White and colored concrete
- Horizontal and vertical surfaces
Application
Dosage: 1 L per 30–50 m² of formwork surface (brush application). Before applying EKAN® OIL 50, the formwork surface must be clean and dry, free of dust or residue. Apply a single thin and uniform layer on the formwork; it can be sprayed evenly or spread with a smooth brush or roller. Avoid excessive application to prevent leaving streaks on the concrete surface.
Technical data
Appearance: Homogeneous
Color: Yellowish
Density: 0.87 ± 0.03 kg/L
Kinematic viscosity @40 ºC: 17 mm²/s
Flash point: 140ºC
Precautions
Avoid contact with eyes and skin.
Detailed health and safety information is provided in the Material Safety Data Sheet (MSDS).
Store in the original tightly closed packaging, in a dry place and protected from direct sunlight.